02Subdivision & approvals
Strata Plans
A strata plan divides a building into lots and common property, each lot with its own title. We survey the building, prepare the strata plan and administration sheets, and lodge the plan with NSW Land Registry Services.
When you need it
Is this the survey you need?
- Strata subdividing a completed duplex
- Selling one dwelling of a duplex on its own title
- Your consent allows strata subdivision of the development
- The dwellings share a wall or structure that suits a strata scheme
- Strata subdividing a small residential building
What's included
What we survey and show
- Survey of the land and the completed building
- Location plan showing the building against the boundaries
- Floor plans defining each lot and the common property
- Lot boundaries described by walls, floors and ceilings
- Courtyards, car spaces and other areas included in lots where approved
- Administration sheets and surveyor's certificate
- Schedule of unit entitlement from the valuer's figures
- 88B instrument where easements or restrictions are needed
- Lodgement with NSW LRS once the strata certificate is issued
Good to know
How a strata plan works
Under the Strata Schemes Development Act 2015, a strata plan has a location plan showing the building on the land, and floor plans that define each lot. Lot boundaries are usually walls, floors and ceilings, and everything outside the lots is common property. Each lot has a unit entitlement, set by a qualified valuer, which sets its share of levies and its voting weight. The surveyor's certificate confirms the plan meets the requirements of the Act.
The strata certificate
Before the plan can be registered, council or a registered certifier must issue a strata certificate. You arrange who issues it, and we supply the signed plan and administration sheets for them to assess. Once the certificate is issued and the documents are signed, we lodge the plan with NSW Land Registry Services. The owners corporation comes into existence when the plan is registered, and each lot then has its own title.
How it works
From quote to signed plan
- CH 0.00
Review the consent
We check the consent and approved plans before surveying.
- CH 25.00
Survey the building
The land and building are measured to define the lots and common property.
- CH 50.00
Plan and admin sheets
The strata plan and administration sheets are prepared with the valuer's figures.
- CH 75.00
Certificate and lodgement
After the strata certificate issues, the plan is lodged with NSW LRS.
What you get
Delivered to you
- Signed strata plan
- Floor & location plans
- Administration sheets
- Lodgement with NSW LRS
Checked and signed by Taha Abdo, Registered Surveyor SU010105.
Who it's for
We send the files to you, or straight to your architect, builder, engineer or certifier.
- Homeowners
- Developers
- Builders
Questions
Common questions
Does the building need to be finished?
Usually, yes. Strata lots are defined by the building itself, so the plan is prepared once the structure is in place. Talk to us early so the timing lines up with your certifier and occupation certificate.
What is common property?
Common property is the part of the scheme that is not in any lot, such as a shared driveway, the main structure of the building, or land not included in a lot. It belongs to the owners corporation, and the plan shows exactly where it is.
Strata or Torrens for my duplex?
It depends on council's controls and how the dwellings are built. Our dual occupancy page explains how the two compare from the survey side. Your town planner can confirm what council will approve.
Related services
Get a quote
Send us the address.
We come back with a fixed fee that lists exactly what is included. Not sure which survey you need? Tell us what you are building.