03During construction
Earthworks and Excavation Volumes
Cut and fill volumes tell you how much material comes out or goes in before the excavator arrives. We calculate them from surveyed levels and the design, so quotes and truck numbers rest on real figures.
When you need it
Is this the survey you need?
- Pricing a basement, pool or large cut on a sloping block
- Estimating spoil removal and truck loads
- Balancing cut and fill on a building pad
- Checking an earthmover's claimed volumes
- Recording the ground before and after earthworks
What's included
What we survey and show
- Existing ground levels from a detail survey
- Design surface from the engineer's or architect's levels
- Cut and fill volumes, with a total for each
- Excavation volumes for basements, pools and footings
- Cut/fill plan showing depths across the site
- Before and after surveys to measure completed work
- 3D surface models supplied in DWG
Good to know
How the volume is worked out
We build a surface of the existing ground from surveyed levels, then a second surface from the design levels. We compare the two and calculate the volume between them, split into cut and fill. The result is the volume measured in the ground. Your earthmover then allows for bulking, the extra space material takes up once it is dug out, when working out truck loads and tipping.
Checking completed work
If you need to confirm what was actually removed, a survey before excavation and another after gives a measured volume. That is useful when payment is based on volume or when spoil has to be tracked. The same before and after surfaces can go to your engineer or contractor in DWG, so everyone involved works from one set of numbers.
How it works
From quote to signed plan
- CH 0.00
Existing levels
A detail survey of the ground is done, or our existing one is used.
- CH 25.00
Design surface
Your design levels are modelled as a second surface.
- CH 50.00
Calculate
Cut and fill volumes are calculated and mapped across the site.
- CH 75.00
Report
You receive a volume report, a cut/fill plan and the DWG.
What you get
Delivered to you
- Volume report (PDF)
- Cut/fill plan
- DWG (CAD)
Checked and signed by Taha Abdo, Registered Surveyor SU010105.
Who it's for
We send the files to you, or straight to your architect, builder, engineer or certifier.
- Builders
- Developers
- Certifiers & engineers
Questions
Common questions
Can you use an existing detail survey?
Yes, if it covers the area and the ground has not changed. If we did the detail survey, the levels are already in our model. If another surveyor did it, send the DWG or points and we will check whether it is suitable.
Do the volumes include bulking?
No. Volumes are reported as measured in the ground. Bulking depends on the type of soil or rock, so your earthmover or engineer applies a factor to the in-ground volume when estimating truck loads.
Can you measure volumes after excavation?
Yes. We survey the excavated ground and compare it with the original surface. That gives a measured volume of what was actually removed or placed, which is useful for checking claims.
Get a quote
Send us the address.
We come back with a fixed fee that lists exactly what is included. Not sure which survey you need? Tell us what you are building.