iGuide

Detail Survey or Boundary Survey?

Homeowners are often told they need a survey without being told which one. A detail survey and a boundary survey answer different questions. Here is the difference, and when you need both.

5 min readBy Taha Abdo, Registered Surveyor SU010105

The short answer

A detail survey records what is on the site and how high it is. A boundary survey works out where the legal boundaries are. Designers need the first to design. Councils, builders and neighbours often care about the second. For most new homes, additions near a boundary, duplexes and subdivisions, you need both.

What a detail survey shows

A detail and level survey, sometimes called a contour survey, is a measured plan of the site as it is today. It usually shows:

  • buildings, with floor levels, ridge and eave heights
  • spot levels and contours to AHD
  • trees, with height, spread and trunk size
  • fences, walls, driveways, paths and pools
  • visible services such as pits, manholes and hydrants
  • kerb, gutter and footpath levels
  • neighbouring buildings and windows near the boundary

It is the base your architect designs on and your engineer uses for stormwater. We supply it as a signed PDF and a DWG CAD file.

What a boundary survey shows

A boundary identification survey determines where the title boundaries are on the ground. The surveyor searches the registered plans for your lot and the lots around it, finds the original survey marks, and decides the boundary on the evidence. The plan then shows the buildings, fences and walls in relation to that boundary, with offsets.

Without this step, the boundary on a detail survey is usually fitted to fences or drawn from title dimensions. That can be close enough for some purposes, but it is not the same as a surveyor's determination.

When a registered surveyor surveys a boundary, the Regulation requires every structure and fence within 1 metre of the boundary, or relevant to it, to be located. So a boundary survey picks up exactly the items councils and neighbours tend to worry about: eaves, walls, sheds and fences close to the line.

Which one council wants

It depends on the council and the work. Most councils want the DA survey plan prepared by a registered surveyor with levels to AHD. Several also want boundary information. For example, Georges River Council asks for a boundary survey or offset measurements for existing buildings within 1 metre of a boundary. Sutherland Shire Council asks that fence and wall offsets not be taken from title dimensions and that the plan notes confirm boundary identification has been done. Check your council's lodgement guide, or ask us and we will tell you what we know for your area.

When you need both

Order both together when:

  • you are building or extending close to a boundary
  • setbacks or lot width are tight under the planning controls
  • you plan a dual occupancy or subdivision
  • fences look old, crooked or out of line
  • council's checklist asks for boundary-based information

A detail survey alone may be fine for internal works or a design study on a large lot well away from the boundaries. A boundary survey alone suits a fence replacement or a question about where the line is.

Why ordering them together saves money

Both surveys need the same site visit, the same control and the same plan search. Doing them together means one trip, one set of measurements and one plan that shows the features and the true boundaries on the same base. If the boundary is identified later, the detail survey may need to be shifted to suit, and your designer may need to recheck setbacks.

What drives the price is mainly the size and slope of the site, how much is on it, and how complex the boundary evidence is. Send us the address and your designer's brief, and we will confirm the survey you need in a fixed-fee quote.

Get a quote

Send us the address.

We come back with a fixed fee that lists exactly what is included. Not sure which survey you need? Tell us what you are building.